48SM-logo-002.jpg
home-up-3.GIF
news-up-3.GIF
e-shop-up-3.GIF
proc-ov-3a.GIF
about-up-3.GIF
link-up-3.gif
cont-up-3.gif
tob-up-3.gif

RC Truck Model Accessories
in 1/14,5 Scale

Self Adhesive Stickers

New at 48 Special Models!
Self adhesive stickers for truck models made from high quality PVC foiles. Cut perfect and with a transfer tape applied on for easy application!
we start with these logos and more will follow soon.

Instruction:
Surface needs to by dry and fat free. Check out the correct position for your sticker carefull and mark it with tape or a pen.
Peel the sticker from the lower wax paper carefull by lifting up the transfer tape on top. Make sure the sticker is in correct shape befor appling it to the surface! Correct it if necessary before putting it in place.
Put the sticker in place beginning at one end and check correct position agein before applying it in total. Gently attach it to the surface and brush over with a cloth or plastic card from one end to the other. Make sure not to move the motive when pressing it onto the surface! Let it rest for some minutes before takeing off the transfer tape carefully by pulling it off in a very low angle. Let the sticker rest for anouter 24 hours after that.

For large stickers use some soapwater solution to moistion the surface then apply the sticker as discribed before. You may be able to adjust the sticker a bit, before pressing it to the surface. After that wipe the moisture out sideways with a cloth or plastic card and let dry completly before removeing the transfer tape! If the sticker comes off during that attempt stop it and let it rest longer before trying again.

v8-gr-002d.jpg
In stock!
order.gif
man-1b.jpg
In stock!
order.gif
V8 Kursiv Outline Logo Sticker, Silver,
Letter Hight 96mm,
1 Set (2 pieces)

Self adhesive sticker made from high quality PVC foil with transfer cover for easy application.
Letter hight: 54mm
Length: 96mm
Item-No.: 17020001
MAN Logo Sticker, Silver,
Letter Hight 8 mm,
1 Set (3 pieces)

Self adhesive sticker made from high quality PVC foil with transfer cover for easy application.
Letter hight: 8mm
Length: 49mm
Item-No.: 17020002
scania-1b.jpg
In stock!
order.gif
volvo-1b.jpg
In stock!
order.gif
SCANIA Logo Sticker, Silver,
Letter Hight 7mm,
1 Set (3 pieces)

Self adhesive sticker made from high quality PVC foil with transfer cover for easy application.
Letter hight: 7mm
Length: 40mm
Item-No.: 17020003
VOLVO Logo Sticker, Silver,
Letter Hight 5mm, 
1 Set (3 pieces)
Self adhesive sticker made from high quality PVC foil with transfer cover for easy application.
Letter hight: 5mm
Length: 41mm
Item-No.: 17020004


man-01.jpg

In stock!
order.gif

RK2-08.jpg

In stock!
order.gif

"MAN" Truck Hub-Cap
with nut protection ring
for Tamiya Cooler Wide Rims
1 Set

1/14 scale
Resin cast part to be placed over the screws and cemented in place. Kit, some minor sanding necessary.
Item-No.: 17010021

"Scania Vabis" Truck Hub-Cap
with nut protection ring
for Tamiya Cooler Wide Rims
1 Set

1/14 scale
Resin cast part to be placed over the screws and cemented in place. Kit, some minor sanding necessary.

Item-No.: 17010015

v8-1-1.jpg

In stock!
order.gif

v8-2-03.jpg

In stock!
order.gif
"V8 kursiv" Truck Hub-Cap
with nut protection ring
for Tamiya Cooler Wide Rims
1 Set

1/14 scale
Resin cast part to be placed over the screws and cemented in place. Kit, some minor sanding necessary.
Item-No.: 17010019
"V8" Truck Hub-Cap
with nut protection ring
for Tamiya Cooler Wide Rims
1 Set
1/14 scale
Resin cast part to be placed over the screws and cemented in place. Kit, some minor sanding necessary.
Item-No.: 17010017
RK-sc-01.jpg
In stock!
order.gif
RK-V8-003.jpg
In stock!
order.gif
"Scania Vabis" Truck Hub-Cap
(2 pieces)
Fits to Tamiya rims in 1/14,5
scale.
Black resin cast part with outstanding relief.
Kit! Part needs to be fitted and painted.
Diameter: 18mm
Item-No.: 17010012
"V8" Truck Hub-Cap
(2 pieces)
Fits to Tamiya rims in 1/14,5 scale.
Black resin cast part with outstanding relief.
Kit! Part needs to be fitted and painted.
Diameter: 18mm
Item-No.: 17010010

Truck Accessories

VK1-001.jpg

Low stock!
order.gif
spoil-01.jpg

Low stock!
order.gif

"Full Cover" Backend Bumper Kit
 for Truck Models

 1/14 scale
Resin cast single piece to cover the Truck's backend.
Minor adjustments and hole drilling necessary.
Glasses for back lights not included!


width: 18,6cm
hight: 4,7cm
depth: ca. 3cm
Item-No.: 17010014
Spoiler Extensions for Scania Trucks
for Tamiya Kits
Resin kit for truck models in 1/14 scale.
Two resin cast pieces for extending the truck spoiler.
Need minor sanding and cleaning before painting.

Size: 40x21mm

Item-No.: 17010011

as-002a.jpg

In stock!

order.gif

Rs01-004a.jpg
Low stock!
order.gif

Exterior Mirrors Set
 for Truck Models

1/14 scale.
consists of 1 left an right double mirror and 1 dead angle mirror with casted mounting arms and M2 screwhole. Made from black resin. Length of mounting armes can be cut to fit easy!
Size:
large mirror: ca.4x2cm
small mirrorl ca. 1,5x1,5cm

Item-No.: 17010006

Bull Bar
 for Trucks
1 piece

Made from gray resin in one part for Trucks (i.e.Scania)
in 1/14 scale.
Only mounting holes need to be drilled and painted!
Size: 
largest width: HxB: 13x16,5cm
Main mount distance (middle/middle): 7cm

Item-No.: 17010005


Truck Blocks 

ukb-001.jpg
Unavailable at the moment!
order.gif

ukg-001.jpg
Low stock!
order.gif

Truck Stop-Blocks, blue
1sets (=2pieces), scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010007

Truck Stop-Blocks, yellow
1sets (=2pieces), scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010003

ukr-003.jpg
Low stock!
order.gif

uks-002a.jpg
Low stock!
order.gif

Truck Stop-Blocks, red
1sets (=2pieces),
scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010004

Truck Stop-Blocks, black
1sets (=2pieces),
scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010002

ukw-001.jpg
Low stock!
order.gif

uko-01.jpg
Low stock!
order.gif

Truck Stop-Blocks, white
1sets (=2pieces), scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

item-No.: 17010001

Truck Stop-Blocks, orange
1sets (=2pieces), scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fits to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010008

ukoliv-003.jpg
Low stock!
order.gif


 Truck Stop-Blocks, NATO oliv green
1sets (=2pieces), scale 1/14,5.
Made from completely colored resin for RC-trucks.
Fit to most mounts in this scale.
Length: 3,5 cm
Width: 1,5cm
Hight 1,8cm

Item-No.: 17010013




For availability check e-shop please!
Click on the picture to get detail information!

home-up-3.GIF
news-up-3.GIF
e-shop-up-3.GIF
proc-ov-3a.GIF
about-up-3.GIF
link-up-3.gif
cont-up-3.gif
tob-up-3.gif